A technical drawing presents several features at once. Building the part requires deciding how those features fit together in three dimensions. In this recording, a reference drawing becomes a bracket with a mounting base, an upright wall, holes, and a central reinforcing rib.
The user supplies the drawing in Codex, and the modeling work appears in Nora3D. The sequence gives a useful view of how a single reference can be broken into a series of visible CAD operations.
Build the part in readable stages
The base comes first. Its outline and mounting holes establish the footprint of the part. An upright profile then adds the rear wall, including the two raised, rounded areas around its holes.
The central rib connects the base and the wall. With that feature in place, the model has the recognizable arrangement shown in the reference: a horizontal mounting surface, a vertical mounting surface, and a triangular support between them. The final view brings these features together for inspection.
Compare the result with the reference
This staged approach gives the reviewer specific things to look at. Does the base outline match? Are the holes on the intended faces? Does the wall rise in the right position? Is the rib placed where the drawing shows it?
The video makes the construction sequence visible, but it does not independently verify every dimension or the bracket's load capacity. Those checks remain separate from judging its appearance.
For your own drawing-to-CAD task, provide a clear reference and state the units and any missing dimensions. Then review the major features as they appear, while the relationship to the drawing is still easy to follow.