You are planning a small display module inside a project. The screen has a footprint, but the cover takes up space too. Before committing to an enclosure layout, you need to see how much room the proposed part will occupy.
Start with the screen dimensions and cover height, then compare the generated cover's outer dimensions with your available space. In this Nora3D example, screen-footprint inputs of 30 × 29 mm and a height input of 6.4 mm produce a cover candidate with native outer dimensions of approximately 32 × 31 × 6.4 mm.
Give the cover its own space budget
Imagine you have chosen a compact display and are deciding where its separate cover will sit. Reserving only the screen's footprint leaves an unanswered question: what space does the surrounding part require?
Keep the design inputs and the finished part's outer size distinct:
| What you specify | Input in this example |
|---|---|
| Screen width | 30 mm |
| Screen depth | 29 mm |
| Cover height | 6.4 mm |
These are the inputs to Nora3D's display-cover template. The generated solid's outer extent is larger than the screen-footprint inputs. Use the 32 × 31 mm outer footprint when reviewing the area occupied by this candidate, and 6.4 mm when reviewing its overall height.
The difference between an input and an outer dimension does not, by itself, tell you the internal clearance or wall thickness. Those are separate geometric checks when you compare the cover with your actual hardware.
Turn the brief into a part you can inspect
For this design scenario, a starting brief could read:
Create a separate display-cover candidate using a screen width of 30 mm, screen depth of 29 mm and cover height of 6.4 mm. I want to inspect its outer size against the space in my project.
The template produces the shallow rectangular part shown above. A small rectangular opening is visible near one edge. Reviewing this actual shape gives you something concrete to compare with the module and its intended location.
That is the value of an early CAD candidate: it moves the discussion from “a small cover should go here” to a specific shape, size and set of features that you can examine.
Review it against the complete module
The screen footprint is one part of the requirements. Your next review should also consider the module body and how the cover is intended to sit around it:
- Outside space: compare the cover's overall footprint and height with the space available in your project.
- Inside space: measure the relevant interior surfaces against the actual module and the clearance you intend to provide.
- Visibility and access: identify what must remain visible or reachable, then check the shape and location of any required openings against the model.
- Attachment: define how the cover should be held in place and inspect the geometry needed for that arrangement.
Use the outcome of each check to describe the next change. An overall height issue, an access requirement and an attachment requirement are different tasks. A specific brief makes the next revision easier to judge.
For a fuller checklist, see how to review a functional CAD design. The board-mount example shows the same habit of separating device requirements from the dimensions of the supporting part.
Keep the candidate for the next decision
This result was verified as one solid, saved and reopened. Its geometry, history and revision were restored after the construction replay.
You have a saved model to return to as the installation requirements become clearer. Give the cover a space budget, inspect the actual result, and let the hardware guide the next decision.