tutorial

Your board sets the dimensions.

· 46 views

Your circuit board needs support at the right positions and the right height. Making a mount bigger in every direction does not answer that need: the holes have their own size requirement.

Specify hole spacing, support height and hole diameter separately. In this Nora3D example, the design inputs are 22 mm hole spacing, 18.5 mm height and 3 mm holes. The result is a standalone mount with two bored posts joined by a base—a compact design to inspect against your board and the space around it.

Three dimensions. Three different jobs.

Imagine you are positioning a small board inside a project. Its mounting locations determine where the supports belong. The components beneath it influence how high it needs to sit. The openings in the mount are another decision.

Those requirements belong in the brief as separate numbers:

Requirement Design input here Question it answers
Hole spacing 22 mm How far apart should the mounting-hole centers be?
Mount height 18.5 mm How tall should the support be?
Hole diameter 3 mm What opening should each support have?

Uniform scaling ties those numbers together. If all dimensions grow by the same factor, the holes grow along with the spacing and height. A dimension-specific brief lets you describe the mount you need without making “bigger” do three different jobs.

Give Nora the mounting requirements

A brief for this design scenario could read:

Create a standalone board mount with 22 mm hole spacing and an 18.5 mm height. Keep the hole diameter requirement at 3 mm. I want two supports joined by a base.

This is a useful way to express the task: name the part, give the dimensions, and separate the requirement that stays fixed. The example uses Nora3D's board-mount template with those inputs to produce the candidate shown above.

The practical value is a concrete starting design. Instead of describing a vague larger bracket, you have an explicit mounting arrangement to examine—and a brief you can refine when your board's requirements change.

Inspect the part against the board

The generated result is one solid, with a native outer bounding box of 28 × 6 × 18.5 mm. In the view, two cylindrical supports rise from a connecting base, with an opening in each support.

The outer size helps you check the space the mount occupies. Hole spacing and diameter answer different questions: measure them in the model against your required mounting positions and openings. The 22 mm and 3 mm values above are the design inputs for those checks.

Start with four decisions:

  • Mounting positions: compare the hole centers with the board's mounting locations.
  • Support level: check where the board would sit relative to the base and nearby components.
  • Openings: choose and inspect the hole dimensions for your intended mounting method.
  • Surrounding space: check the base and posts against the available envelope and access to connectors.

This makes the review specific. If the support level is wrong, your next requirement concerns height. If the centers are wrong, it concerns spacing. You can describe the issue without asking for an entirely different-looking part.

For a broader checklist, read how to review a functional CAD design.

Keep a model you can come back to

The candidate was saved and reopened. After its construction replay, the model's geometry and history were restored. That gives you a design to return to for another inspection, rather than a picture of a possible bracket.

This example starts with a standalone mount. If you already have a useful part and need to change one area, the related motor-mount slot example shows a different task: extending an adjustment path while retaining the motor interface.

Start with your board's mounting requirements. Let those requirements define the support.

Design your board mount in Nora3D