Existing Model Edits · Free generator

Imported stand arm with accessory mount

An original non-parametric stand arm with an added mounting pad, two fasteners and a configurable accessory socket. The output is one selected arm.

Free customization & STL download · No account needed

AI CAD prompt ↓Edit & export STEP CAD ↓

Open generator in a full window ↗

Edit the design. Export CAD.

Choose Continue editing in Nora3D inside the generator to keep your dimensions in an editable copy. Change features and export STEP CAD files.

Before you print

Retains component 1 from the existing folding-stand library model. Added pad is 60 x 6 x 24 at X=-180, Y=2.5, Z=3. Two fixed side relief channels keep the original recesses open. Socket only cuts the new pad; fasteners and relief channels locally meet the arm wall. The remaining arm, hook and pivot geometry stays fixed. Check assembly motion after fitting an accessory. Geometry has been digitally checked; this template has not been physically test-printed.

Build on this design

AI CAD prompt

Read as text ↗

Use this prompt with Nora3D or your AI assistant. Review the resulting geometry before printing.

View full prompt

Copy the authorized existing non-parametric folding stand into a new private document. Select original component 1 by observed identity and topology; retain it as Source part and exclude the other assembly members from this component-only output. In the inspected source, the long arm has an exterior plane at Y=0, Z=0..30. Verify these source-specific coordinates before proceeding. Keep the original library document unchanged.

1. Create **Accessory pad**, a 60 × 6 × 24 box, centered at X=-180, Y=2.5, with its bottom at Z=3.
2. Unite **Source part**, **Accessory pad** as **Arm with mounting pad**. Require one connected result.
3. Create **Accessory socket**, a 22 × 8 × 14 box, centered at X=-180, Y=6, with its bottom at Z=8.
4. Create **Left fastener**, radius 2.6, height 16, initially along +Z, with its base center at (-203, -8, 15).
5. Rotate the current **Left fastener** solid -90 degrees around world X through [-203, -8, 15]. Resolve the actual current entity ID before the operation.
6. Create **Right fastener**, radius 2.6, height 16, initially along +Z, with its base center at (-157, -8, 15).
7. Rotate the current **Right fastener** solid -90 degrees around world X through [-157, -8, 15]. Resolve the actual current entity ID before the operation.
8. Subtract **Accessory socket**, **Left fastener**, **Right fastener** from **Arm with mounting pad**, consuming the tools; name the result **Imported arm accessory mount**.
9. Create **Left recess relief**, a 26 × 2 × 3 box, centered at X=-197, Y=0.5, with its bottom at Z=20.
10. Create **Right recess relief**, a 26 × 2 × 3 box, centered at X=-162, Y=0.5, with its bottom at Z=20.
11. Subtract **Left recess relief**, **Right recess relief** from **Imported arm accessory mount**, consuming the tools; name the result **Open recess reliefs**.

## Public controls

| Control | Default | Range | Step | Meaning |
| --- | ---: | --- | ---: | --- |
| Accessory socket width | 22 | 16–28 | 1 | Width of the added socket, leaving the original arm behind it intact. |
| Accessory socket height | 14 | 10–18 | 1 | Height from the fixed lower edge at Z=8. |
| Left fastener radius | 2.6 | 2.2–3.2 | 0.1 | Radius through the added pad and local original arm wall. |

All unlisted dimensions, topology and feature order remain fixed. Radius controls are radii, not diameters. These are independent numeric ranges; do not introduce unsupported formula bindings or assume a fit standard from an example value.

Adjustable dimensions

Parameter	Default	Range	Step
Accessory socket width	22 mm	16–28 mm	1 mm
Accessory socket height	14 mm	10–18 mm	1 mm
Left fastener radius	2.6 mm	2.2–3.2 mm	0.1 mm