Two-hole mounting plate

Use Nora3D native parametric CAD operations. Work in a new, named document owned by the intended user. Units are millimeters. Inspect the bound document and supported operations before writing. Use current native IDs and returned replacement IDs; do not guess face or body identifiers. Save and reopen the final model. Preserve editable feature history.

Expose only the parameters listed below. Keep all other dimensions fixed. Use English public labels and descriptions, even if the native kernel uses localized internal variable names. Do not claim a physical print, load rating, injection-molding suitability or exact recreation from the prompt alone.

Create a box named Plate, X width 60 mm, Y depth 30 mm, Z thickness 4 mm, bottom center at the origin. Create two vertical cylindrical cutting tools named Hole 1 and Hole 2, each radius 2.5 mm and height 30 mm, with bottom centers (-15, 0, -5) and (15, 0, -5). Subtract both tools from Plate and consume the tools. The two 5 mm holes stay on 30 mm centers and centered on the plate while the outside dimensions change.

| Parameter | Default | Range | Step |
| --- | ---: | --- | ---: |
| Plate width | 60 mm | 50–100 mm | 1 mm |
| Plate depth | 30 mm | 20–60 mm | 1 mm |
| Plate thickness | 4 mm | 2–10 mm | 1 mm |