Home & Plants · Free generator

Plant pot saucer with raised supports

A plant pot saucer with a raised cross support and four feet, leaving a shallow space beneath the pot for drainage.

Free customization & STL download · No account needed

Edit the design. Export CAD.

Choose Continue editing in Nora3D inside the generator to keep your dimensions in an editable copy. Change features and export STEP CAD files.

Before you print

Outside diameter 140 mm, floor 4 mm, feet 3 mm and cross support 3 mm. Pot seat diameter is twice the selected radius. Rim height is measured above the feet. Check water retention after printing; geometry alone does not establish watertightness of a printed part. Geometry has been digitally checked; this template has not been physically test-printed.

Build on this design

AI CAD prompt

Read as text ↗

Use this prompt with Nora3D or your AI assistant. Review the resulting geometry before printing.

View full prompt

Create a new owned Nora3D part document. Use millimeters, world XY as the base and +Z as height. These dimensions are example defaults, not a claim of compatibility with a specific product. Retain named editable native features.

1. Create **Saucer rim**, radius 70 mm and height 14 mm along +Z, with its base center at (0, 0, 3).
2. Create **Foot -42 -42**, radius 5 mm and height 3 mm along +Z, with its base center at (-42, -42, 0).
3. Create **Foot -42 42**, radius 5 mm and height 3 mm along +Z, with its base center at (-42, 42, 0).
4. Create **Foot 42 -42**, radius 5 mm and height 3 mm along +Z, with its base center at (42, -42, 0).
5. Create **Foot 42 42**, radius 5 mm and height 3 mm along +Z, with its base center at (42, 42, 0).
6. Unite **Saucer rim**, **Foot -42 -42**, **Foot -42 42**, **Foot 42 -42**, **Foot 42 42** as **Footed saucer**. Require one connected solid.
7. Create **Pot seat**, radius 60 mm and height 36 mm along +Z, with its base center at (0, 0, 7).
8. Subtract **Pot seat** from **Footed saucer**, consuming the tool solids; name the result **Open saucer**.
9. Create **Cross support X**, a 76 x 6 x 3 mm box, centered at X=0, Y=0, with its bottom at Z=7.
10. Create **Cross support Y**, a 6 x 76 x 3 mm box, centered at X=0, Y=0, with its bottom at Z=7.
11. Unite **Open saucer**, **Cross support X**, **Cross support Y** as **Plant pot saucer**. Require one connected solid.

## Public controls

| Control | Default | Range | Step | Meaning |
| --- | ---: | --- | ---: | --- |
| Pot seat radius | 60 | 45-64 | 1 | Inside radius for the pot base, including clearance; diameter is twice this value. |
| Rim height above feet | 14 | 10-22 | 1 | Height measured from the top of the 3 mm feet. |

Keep all other features, positions and dimensions fixed. Expose only the listed controls. Radius means radius, not diameter; include physical clearance when choosing dimensions. Preserve open cavities, drainage paths and a single connected solid throughout the stated ranges.

Adjustable dimensions

Parameter	Default	Range	Step
Pot seat radius	60 mm	45–64 mm	1 mm
Rim height above feet	14 mm	10–22 mm	1 mm