Desk & Bedside · Free generator

Phone charging dock with accessory tray

An upright phone dock with an adjustable cradle, a rear cable route and a front tray for small accessories.

Free customization & STL download · No account needed

Edit the design. Export CAD.

Choose Continue editing in Nora3D inside the generator to keep your dimensions in an editable copy. Change features and export STEP CAD files.

Before you print

Footprint 118 x 88 mm; height 48 mm. The cradle has a 12 mm floor and a cable opening connected to a 10 x 4 mm underside tunnel exiting at the rear. The front tray floor is 8 mm. Measure the phone with its case. Check the connector size before printing. No charger or electrical parts are included. Geometry has been digitally checked; this template has not been physically test-printed.

Build on this design

AI CAD prompt

Read as text ↗

Use this prompt with Nora3D or your AI assistant. Review the resulting geometry before printing.

View full prompt

Create a new owned Nora3D part document. Use millimeters, world XY as the base and +Z as height. These dimensions are example defaults, not a claim of compatibility with a specific product. Retain named editable native features.

1. Create **Base**, a 118 x 88 x 4 mm box, centered at X=0, Y=0, with its bottom at Z=0.
2. Create **Dock body**, a 110 x 80 x 48 mm box, centered at X=0, Y=0, with its bottom at Z=0.
3. Unite **Base**, **Dock body** as **Dock blank**. Require one connected solid.
4. Create **Phone cradle**, a 84 x 13 x 60 mm box, centered at X=0, Y=8, with its bottom at Z=12.
5. Create **Accessory tray**, a 76 x 24 x 60 mm box, centered at X=0, Y=-22, with its bottom at Z=8.
6. Create **Cable opening**, radius 3.5 mm and height 18 mm along +Z, with its base center at (0, 8, -1).
7. Subtract **Phone cradle**, **Accessory tray**, **Cable opening** from **Dock blank**, consuming the tool solids; name the result **Phone charging dock**.
8. Create **Rear cable route**, a 10 x 42 x 5 mm box, centered at X=0, Y=25, with its bottom at Z=-1.
9. Subtract **Rear cable route** from **Phone charging dock**, consuming the tool solids; name the result **Dock with rear cable route**.

## Public controls

| Control | Default | Range | Step | Meaning |
| --- | ---: | --- | ---: | --- |
| Phone cradle width | 84 | 70-96 | 1 | Inside width for the phone with its case. |
| Phone and case thickness | 13 | 9-20 | 1 | Inside front-to-back gap, including fit clearance. |
| Charging opening radius | 3.5 | 2.5-4 | 0.5 | Radius of the vertical cable opening; diameter is twice this value. |

Keep all other features, positions and dimensions fixed. Expose only the listed controls. Radius means radius, not diameter; include physical clearance when choosing dimensions. Preserve open cavities, drainage paths and a single connected solid throughout the stated ranges.

Adjustable dimensions

Parameter	Default	Range	Step
Phone cradle width	84 mm	70–96 mm	1 mm
Phone and case thickness	13 mm	9–20 mm	1 mm
Charging opening radius	3.5 mm	2.5–4 mm	0.5 mm