AI CAD prompt: Six-lobe replacement handwheel

Create a new owned Nora3D part document. Use millimeters, world XY as the base and +Z as height. Retain named native features and expose only the controls listed below.

1. Create **Grip core**, radius 23, height 12, initially along +Z, with its base center at (0, 0, 0).
2. Create **Hub**, radius 10, height 32, initially along +Z, with its base center at (0, 0, 0).
3. Create **Lobe 0**, radius 10, height 12, initially along +Z, with its base center at (22, 0, 0).
4. Create **Lobe 1**, radius 10, height 12, initially along +Z, with its base center at (11.000000000000002, 19.05255888325765, 0).
5. Create **Lobe 2**, radius 10, height 12, initially along +Z, with its base center at (-10.999999999999995, 19.052558883257653, 0).
6. Create **Lobe 3**, radius 10, height 12, initially along +Z, with its base center at (-22, 2.6942229581241772e-15, 0).
7. Create **Lobe 4**, radius 10, height 12, initially along +Z, with its base center at (-11.00000000000001, -19.052558883257646, 0).
8. Create **Lobe 5**, radius 10, height 12, initially along +Z, with its base center at (11.000000000000002, -19.05255888325765, 0).
9. Unite **Grip core**, **Hub**, **Lobe 0**, **Lobe 1**, **Lobe 2**, **Lobe 3**, **Lobe 4**, **Lobe 5** as **Handwheel blank**. Require one connected result.
10. Create **Drive socket**, a 8 × 8 × 28 box, centered at X=0, Y=0, with its bottom at Z=8.
11. Create **Washer seat**, radius 7.5, height 5, initially along +Z, with its base center at (0, 0, 29).
12. Create **Set screw**, radius 1.5, height 15, initially along +Z, with its base center at (0, 0, 20).
13. Rotate the current **Set screw** solid 90 degrees around world Y through [0, 0, 20]. Resolve the actual current entity ID before the operation.
14. Subtract **Drive socket**, **Washer seat**, **Set screw** from **Handwheel blank**, consuming the tools; name the result **Replacement handwheel**.

## Public controls

| Control | Default | Range | Step | Meaning |
| --- | ---: | --- | ---: | --- |
| Shaft socket width | 8 | 6–9 | 1 | Rectangular shaft socket width, including fit allowance. |
| Shaft socket length | 8 | 6–9 | 1 | Rectangular shaft socket length, including fit allowance. |
| Washer recess radius | 7.5 | 7–8.5 | 0.1 | Radius of the recessed washer seat above the drive socket. |

All unlisted dimensions, topology and feature order remain fixed. Radius controls are radii, not diameters. These are independent numeric ranges; do not introduce unsupported formula bindings or assume a fit standard from an example value.