AI CAD prompt: Three-bay fastener organizer

Create a new owned Nora3D part document. Use millimeters, world XY as the base and +Z as height. Retain named native features and expose only the controls listed below.

1. Create **Tray blank**, a 160 × 100 × 32 box, centered at X=0, Y=0, with its bottom at Z=0.
2. Create **Rear mounting rail**, a 160 × 6 × 48 box, centered at X=0, Y=47, with its bottom at Z=0.
3. Unite **Tray blank**, **Rear mounting rail** as **Organizer blank**. Require one connected result.
4. Create **Bay 1**, a 44 × 94 × 36 box, centered at X=-51, Y=0, with its bottom at Z=3.
5. Create **Label 1**, a 34 × 2 × 10 box, centered at X=-51, Y=-50, with its bottom at Z=12.
6. Create **Bay 2**, a 44 × 94 × 36 box, centered at X=0, Y=0, with its bottom at Z=3.
7. Create **Label 2**, a 34 × 2 × 10 box, centered at X=0, Y=-50, with its bottom at Z=12.
8. Create **Bay 3**, a 44 × 94 × 36 box, centered at X=51, Y=0, with its bottom at Z=3.
9. Create **Label 3**, a 34 × 2 × 10 box, centered at X=51, Y=-50, with its bottom at Z=12.
10. Create **Wall fastener -60**, radius 2.75, height 12, initially along +Z, with its base center at (-60, 41, 40).
11. Rotate the current **Wall fastener -60** solid -90 degrees around world X through [-60, 41, 40]. Resolve the actual current entity ID before the operation.
12. Create **Wall fastener 60**, radius 2.75, height 12, initially along +Z, with its base center at (60, 41, 40).
13. Rotate the current **Wall fastener 60** solid -90 degrees around world X through [60, 41, 40]. Resolve the actual current entity ID before the operation.
14. Subtract **Bay 1**, **Label 1**, **Bay 2**, **Label 2**, **Bay 3**, **Label 3**, **Wall fastener -60**, **Wall fastener 60** from **Organizer blank**, consuming the tools; name the result **Fastener organizer**.

## Public controls

| Control | Default | Range | Step | Meaning |
| --- | ---: | --- | ---: | --- |
| Compartment 1 width | 44 | 36–46 | 1 | Inside width of compartment 1. |
| Compartment 2 width | 44 | 36–46 | 1 | Inside width of compartment 2. |
| Compartment 3 width | 44 | 36–46 | 1 | Inside width of compartment 3. |

All unlisted dimensions, topology and feature order remain fixed. Radius controls are radii, not diameters. These are independent numeric ranges; do not introduce unsupported formula bindings or assume a fit standard from an example value.