AI CAD prompt: Two-bay remote control caddy

Create a new owned Nora3D part document. Use millimeters, world XY as the base and +Z as height. These dimensions are example defaults, not a claim of compatibility with a specific product. Retain named editable native features.

1. Create **Base**, a 144 x 84 x 4 mm box, centered at X=0, Y=0, with its bottom at Z=0.
2. Create **Caddy body**, a 140 x 80 x 90 mm box, centered at X=0, Y=0, with its bottom at Z=4.
3. Unite **Base**, **Caddy body** as **Caddy blank**. Require one connected solid.
4. Create **Remote bay 1**, a 50 x 52 x 110 mm box, centered at X=-32, Y=0, with its bottom at Z=8.
5. Create **Finger window 1**, a 30 x 20 x 70 mm box, centered at X=-32, Y=-35, with its bottom at Z=42.
6. Create **Cable exit 1**, radius 4 mm and height 12 mm along +Z, with its base center at (-32, 0, -1).
7. Create **Remote bay 2**, a 50 x 52 x 110 mm box, centered at X=32, Y=0, with its bottom at Z=8.
8. Create **Finger window 2**, a 30 x 20 x 70 mm box, centered at X=32, Y=-35, with its bottom at Z=42.
9. Create **Cable exit 2**, radius 4 mm and height 12 mm along +Z, with its base center at (32, 0, -1).
10. Subtract **Remote bay 1**, **Finger window 1**, **Cable exit 1**, **Remote bay 2**, **Finger window 2**, **Cable exit 2** from **Caddy blank**, consuming the tool solids; name the result **Remote control caddy**.

## Public controls

| Control | Default | Range | Step | Meaning |
| --- | ---: | --- | ---: | --- |
| Left remote compartment width | 50 | 42-58 | 1 | Inside width for the left remote or small device. |
| Right remote compartment width | 50 | 42-58 | 1 | Inside width for the right remote or small device. |
| Holder height above base | 90 | 70-100 | 1 | Height above the 4 mm base. |

Keep all other features, positions and dimensions fixed. Expose only the listed controls. Radius means radius, not diameter; include physical clearance when choosing dimensions. Preserve open cavities, drainage paths and a single connected solid throughout the stated ranges.